User manual

100
14. Saving/Loading Rechargeable Battery Data
The charger has a total of 10 memories in which you can save rechargeable battery
data/settings. They can be loaded again on demand.
a) Selecting/Setting Rechargeable Battery Data
• Selectthefunction"BATTMEMORY"inthemainmenu
of the charger with the button "INC" or "DEC".
• Conrmtheselectionbypressingthe"START/ENTER"
button.Thememorynumberashes.
• Selectoneofthe10memorieswiththebuttons"INC"or
"DEC".
If there already are data in the memory, the display will alternate, e.g., between the
rechargeable battery type and the cell number, as well as the charging and discharg-
ing current.
When the memory is empty, only "ENTER SET ->" is displayed.
• Conrmtheselectionofthememorynumberbypress-
ing the "START/ENTER" button.
 The rechargeable battery type is displayed rst; see
gureontheright.
• Thebuttons"INC"and"DEC"selectthedesiredsettingfunction(e.g.batterytype,cellnum-
ber, charge current, etc.). A description of the respective setting functions shown is included
on the following pages.
 Ifasettingistobechanged,brieypushthebutton"START/ENTER".Therespectivelyadjust-
ablevalueashes.
• Changetheashing value withthebuttons"INC" and"DEC".Keepthe respective button
pressed for quick adjustment.
• Completethesettingbybrieypushingthe"START/ENTER"button.Therespectiveadjust-
ablevaluestopsashing.Thenyoucanselectanothersettingfunction,seeabove.
If you want to save all previous settings in the
memoryselectedatrst,callthesettingfunc-
tion "SAVE PROGRAM" at the end with the
buttons"INC"and"DEC"andbrieypushthe
button "START/ENTER".
If this is not done, all settings are lost!
PROGRAM SELECT
BATT MEMORY
[ BATT MEMORY 1]
ENTER SET->
BATT TYPE
LiPo
SAVE PROGRAM
ENTER