VODVR 9000 Series DVR Quick Operation Guide
User Manual of VODVR 9000 Series DVR Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to OPTIVA VODVR 9000 series DVR. Verify Contents Verify that the package contents are correct by checking the items against the packing list. Note: Please contact your dealer for damaged or missing items. DVR Pre-Installation The 9000/9100 Series DVR is highly advanced surveillance equipment that should be installed with care.
User Manual of VODVR 9000 Series DVR 3. Connect the HDD to the motherboard of the DVR with the included data cable. 4. Connect the power cable to the HDD. 5. Re-install the cover of the DVR and fasten screws.
User Manual of VODVR 9000 Series DVR Front Panel The front panel of VODVR9100 /VODVR9100 is shown below: Table 1 Description of Control Panel Buttons No. Name Function Description 1 POWER POWER indicator turns green when DVR is powered up. 2 STATUS STATUS indicator lights in red when HDD is reading/writing. 3 Tx/Rx 4 USB Interface 5 IR Receiver Tx/Rx indictor blinks green when network connection is functioning properly. Connects USB mouse or USB flash memory devices.
User Manual of VODVR 9000 Series DVR Table 2 Description of Rear Panel No. Item Description 1 VIDEO IN BNC connector for analog video input. 2 VIDEO OUT BNC connector for video output. 3 USB Interface Connects USB mouse or USB flash memory devices. 4 HDMI HDMI video output. 5 VGA DB15 connector for VGA output. Display local video output and menu. 6 AUDIO IN RCA connector for audio input. 7 AUDIO OUT RCA connector for audio output.
User Manual of VODVR 9000 Series DVR Specifications Table 3 Specifications for VODVR9100 Model Video/Audio input VODVR9104 VODVR9008 VODVR9016 Video compression H.264 Video input 4-ch Video input interface BNC (1.0 Vp-p, 75 Ω), PAL /NTSC self-adaptive Audio compression G.711u Audio input 1-ch, RCA (2.0 Vp-p, 1 kΩ) Two-way audio input 1-ch, RCA (2.
User Manual of VODVR 9000 Series DVR External interface Network interface 1, RJ45 10M / 100M Ethernet interface Serial interface 1 RS-485 interface, half-duplex USB interface 2, USB 2.
User Manual of VODVR 9000 Series DVR Menu Operation Menu Structure The menu structure of the DVR is shown as below: Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the DVR. Before you start: Check that the voltage of the extra power supply is the same with the device’s requirement, and the ground connection is working properly. Starting up the device: Steps: 1. Check the power supply is plugged into an electrical outlet.
User Manual of VODVR 9000 Series DVR 2. Click the Shutdown button to enter the following dialog box: 3. Click the Yes button. The following message box pops up: 4. Turn off the power switch on the rear panel of DVR. Using the Setup Wizard The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard starts once the device has loaded. Operating the Setup Wizard: 1. Select the system resolution from the drop-down menu. The default resolution is 1280×1024/60Hz.
User Manual of VODVR 9000 Series DVR 2. Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the setup wizard. You can also click Cancel to exit the Setup Wizard, or use the Setup Wizard next time by leaving the “Start wizard when DVR starts?” checkbox checked and exit. 3. Click Next button on the Wizard window to enter the Login window. 1) Enter the admin password. By default, the password is 12345. 2) To change the admin password, check the New Admin Password checkbox.
User Manual of VODVR 9000 Series DVR 5. Click Next button which takes you back to the Network Setup Wizard window. Set the network parameters, including the NIC type, IPv4 address, IPv4 subnet mask, default gateway, etc. You can enable the DHCP to automatically obtain an IP address and other network settings from that server. 6. Click Next button to enter the HDD Management window. To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD.
User Manual of VODVR 9000 Series DVR 7. Click Next button to enter the Record Settings window. 1) Select the camera to configure. 2) Check the checkbox to enable Start Recording. 3) Select the recording mode to Normal or Motion Detection. 4) Click Copy to copy the record settings of the current camera to other camera (s) if needed.
User Manual of VODVR 9000 Series DVR 5) 8. Click OK to return to the Record Settings window. Click OK to complete the startup Setup Wizard. Live View Some icons are provided on screen in Live View mode to indicate different camera status. These icons include: Live View Icons In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the record and alarm in the channel, so that you can find problems as soon as possible.
User Manual of VODVR 9000 Series DVR Table 5 Description of the PTZ toolbar icons Icon Description Icon Description Icon Description Direction button and the Zoom+, Focus+, Zoom-, Focus-, auto-cycle button Iris+ Iris- Light on/off Wiper on/off The speed of the PTZ movement Image 3D-Zoom Preset Centralization Patrol Pattern Previous item Next item Menu Start pattern/patrol Stop the patrol or pattern Minimize movement windows Exit Record You can use the right-click menu in live view
User Manual of VODVR 9000 Series DVR 2. Click the Start Recording submenu and select the recording mode to Normal Record or Motion Detection Record. 3. In the pop-up message box, click Yes to finish the quick recording settings for all channels. Note: The full-screen motion detection triggered recording is configured by default in this mode. Playback Play back the record files of a specific channel in the live view menu.
User Manual of VODVR 9000 Series DVR All-day Playback by channel 1. Enter the All-day Playback menu. Mouse: right click a channel in live view mode and select All-day Playback from the menu. Press PLAY button on the IR remote control to play back record files of the channel under single-screen live view. Under multi-screen live view, record files of the top left channel (not masked) will be played back. 2. Playback management.
User Manual of VODVR 9000 Series DVR The channel and time selection menu will display by moving the mouse to the right of the playback interface. Tick the channel or channels if you want to switch playback to another channel or execute simultaneous playback of multiple channels. Backup Recorded files can be backed up to various devices, such as USB flash drives, USB HDDs or a DVD writer. To export recorded files: 1. Click Menu>Export to enter Video Export interface.
User Manual of VODVR 9000 Series DVR 2. Enter Export interface, choose backup device and click Export button to start exporting. 3. Check backup result. Choose the record file in Export interface and click the button 17 to check it.
User Manual of VODVR 9000 Series DVR 0201021020831 18
