User manual

3
3. Installation
1 USB Mouse Port 2.0 USB Mouse
2 Video In 8CH Video Input (BNC)
3 Video Out 1CH Video Output (BNC)
4 Audio Out 1CH Audio Output (RCA)
5 Audio In 4CH Audio Input
6 Alarm Alarm I/O
7 DC12V Power Input
8 XGA PC Monitor Output
9 LAN RJ-45 Network Connection
10 RS-485 For Speed Dome Use
Item
Point 1: CH1 sensor input.
Point 2: CH2 sensor input.
Point 3: CH3 sensor input.
Point 4: CH4 sensor input.
Point 5: ground.
Point 6: the first relay joint port.
Point 7: the first relay normal open.
4. DVR Installation
 Connect the camera video output to the DVR video input port with BNC
connectors.
The camera install coaxial cable is suggested cat 6 or above.
 DVR Network installation
Please connect DVR to HUB or router by using RJ-45 network cable and
make sure the DVR network indicator LED is on.
(Please refer to Network Setup for further network setting information of
using static IP, PPPoE or DHCP.