User manual

15
 Motion Detection
Select the channel to set. COPY icon can copy the present setting to other
channels.
 Channel Status
Enable/disable motion detection for each camera. Set: On/Off
 Sensitivity
Sensitivity level of motion detection. Set: 1~10. Higher value equal more
sensitive.
 Motion Area Setup
Setup by each small square.
Setup Operation Front Panel & Remote Controller USB Mouse
Area Selection [Up/Down/Left/Right] [Moving Cursor]
Set Detection Area: must set
on none detection
area(Transparent Area)
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
Clear Detection Area: clear the
set detection area: must set on
detection area(Green Area)
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
Return to Upper Menu [MENU] [Right Click]
8.5 Network Setup