Specifications

PRODUCT SPECIFICATIONS
© Copyright 2018, VOLT
®
Lighting, Lutz, FL USA 33549 • All rights reserved • 813.978.3700
www.voltlighting.com
Project Name __________________________________ Date ___________
Type or Model __________________________________ Qty ____________
VOLT
®
Low Voltage Landscape Lighting
The All-Star™ MR-16 Brass Downlight
The All-Star
TM
MR-16 Downlight has been specically designed
by VOLT® with downlighting and moonlighting in mind. The
40’ lead wire makes for easy installation in higher areas
without the need to splice while up in a tree. The extra-
large knuckle with 42 small interlocking teeth allows for
precision aiming without the risk of the xture aim falling
due to gravity over time. The knuckle is not only gasketed,
but was designed to prevent water from reaching the socket
should water somehow intrude, by forcing water to run down
the side of the faceplate and out the 360 degree weep holes
surrounding the front lens. The glare guard is fully adjustable,
but can be secured even tighter by utilizing the set ring
around the xture’s faceplate. Another water shedding
benet to the design of this downlight is that the backside of
the body is larger than the front faceplate, allowing for easy
water shedding at any downward angle. The All Star Downlight
lives up to its name and the VOLT quality. The aesthetic
design compliments the rest of the All-star™ line by VOLT®
so you or your customer know you are using top of the line
lighting xtures. These can be mounted using one of VOLT’S
surface, tree, or tripod mounts and come with a lifetime
warranty.
◗ Solid Cast Brass Construction.
◗ Pre-aged nish; natural patina that does not corrode.
◗ Beryllium copper socket more corrosion resistant than
copper.
◗ Silicone plug at lead wire exit prevents ground moisture
and insects from entering luminaire through the stem.
◗ 360 degree weep holes surround the front lens to allow
water to drain.
◗ Extra-long (1-inch) strip resistant threading and solid brass
locknut provide superior mounting stability.
◗ Heavy duty adjustable knuckle and adjustable glare guard
allows light to be precision aim.
Product Description
Features & Benets
Product Dimensions
◗ Construction: Solid Cast Brass
◗ Finish: Bronze
◗ Lead Wire: 18 AWG wire
◗ Mounting: Surface, Tree or Tripod Mount
◗ Glass or Lens: Flat
◗ Light Source: MR16 (sold separately)
◗ Maximum Lamp Rating: 20W
◗ Operating Voltage: 12V AC
◗ Powered by: VOLT’s Low Voltage Transformer
◗ Mounting Hardware: Stainless steel screws and nylon
o sets included.
Specications
VOLT
®
Lifetime Warranty
Warranty
File # E466348
Certications
File #E466348
LISTED
Max 20 Watts Max 20 Watts
3.25”
5”
6.25”
7.63”
2.5”