User manual

VoloFone™ VF100 User Manual

Setting the Date and Time

To set the Date and Time on your VoloFone™ VF100 follow these steps:

 From the Navigation panel select System followed by Date/Time - the Date and Time page appears:

 By default, the NTP (Network Time Protocol) Server is enabled, meaning the VoloFone™ VF100 will

synchronise the date and time with a time server and the Date and Time fields are not enabled for

editing. If you wish to control the time and date setting locally, disable the NTP Server as follows:

 From the drop-down list select Disabled then click the Apply button – the page will reload with the

Date and Time fields enabled for editing.

 Enter the current Date and Time.

 Select your Local Timezone Offset from the drop-own list.

 Click the Apply button to save the settings.

Updating the VoloFone™ Firmware

From time to time it may be necessary to update the VoloFone™ VF100 firmware. To obtain updated

firmware please contact your VoloFone™ supplier then proceed as follows:

 Click the Browse button to locate the Firmware Update file - a browse box opens.