User manual

VoloFone™ VF100 User Manual
Copyright © Vololink Pty Ltd 2006-08 V1.1 Jan 2008 Page 31 of 50
System Configuration
Password Change
The default password for your VoloFone™ VF100 is “password”. This should be changed to protect
access to your VoloFone™ VF100. To change the default password, follow these steps:
 From the Navigation panel, select System - the System page appears.
Under the System Information heading the following items appear:
 Model Name This is the Model Name of your VoloFone™ VF100.
 System Uptime The lapsed time since your VoloFone™ VF100 was powered on.
 Firmware Version The Version Number of the Firmware installed on your VoloFone™ VF100.
 Serial Number The Serial Number of your VoloFone™ VF100.
 IMEI The International Mobile Equipment Identity number. A number unique to
every GSM and UMTS mobile device, in this case, your VoloFone™
VF100. The IMEI number is used identify the device only, it is not related
to the SIM or the subscriber.
Under the System Settings heading the following items appear:
 VoloAdmin™ Password This is where you can change your VoloAdmin™ password.
 Language Select the Language from the drop-down list.
To change your VoloAdmin™ Password:
 Enter your new password in the editbox, then click the Apply button.
 You are prompted to Log in using the new password.
 Enter the new password and click the OK button.