User manual

VoloFone™ VF100 User Manual

Configuring PPP Authentication

In most cases PPP authentication is not required by an ISP.

PPP authentication provides that a host, before establishing a PPP connection, may require that the other

host uniquely identify itself using prearranged, secure data known to both hosts. This is in the form of a

PPP Username and PPP Password pair.

To configure PPP Authentication proceed as follows:

 Click the drop-down list next to PPP Authentication (see below) and select Enabled

then click the Apply button.

The page will update to include PPP Username and Password entries.

 Enter the PPP Username in the editbox provided.

 Enter the PPP Password in the editbox provided.

 Click the Apply button.