User manual

VoloFone™ VF100 User Manual

WAN

To view the WAN (Wide Area Network) status and configure PPP (Point to Point Protocol) Authentication

click WAN on the Navigation panel - the WAN page appears:

The WAN page displays the following:

 Wireless Broadband Status Displays current connection status, your server assigned IP address

and Subnet Mask, the IP addresses of your ISP’s DNS (Domain Name

Server) and the MTU (Maximum Transmission Unit) value set on your

computer.

 Traffic Statistics Shows the number of packets and bytes transmitted (TX) and received

(RX).

 Configuration Allows you to define your ISP’s APN. You can also configure PPP

Authentication. See below for information on configuring the APN and

PPP Authentication.

Configuring the APN (Access Point Name)

 Enter the name of your ISP’s Access Point in the editbox provided.

 Click the Apply button.