User manual

VoloFone™ VF100 User Manual
Copyright © Vololink Pty Ltd 2006-08 V1.1 Jan 2008 Page 13 of 50
A dialog box similar to the following appears (Windows Vista shown here)
 Ensure that Obtain an IP address and Obtain DNS Server address are both set to automatic.
The VoloFone™ VF100 is a DHCP server and will provide both of these addresses.
Checking the Connection
When the VoloFone™ VF100 has been connected and the above steps
completed, check that a connection exists between the VoloFone™ VF100 and
the computer. This is done by viewing the (Green) Link light on the VoloFone™
VF100 and computer LAN connectors. They should both be lit and steady.
The next step is to connect to the VoloAdmin™ interface as follows:
 Open your browser and enter the address http://192.168.0.1 in the Address line shown below, then
press Enter.