User manual

VoloAccess™ User Manual
Copyright © Vololink Pty Ltd 2006-2010 V1.43 July 2010 Page 53 of 78
Save/Restore Configuration
It is good practice to save the VoloAccess configuration to a file so that it can be restored at a later date if
it becomes necessary to recover from a configuration error. To save the configuration, proceed as follows:
● Select System followed by Save/Restore in the Navigation panel - the Save/Restore page appears:
● Click the Save Configuration button.
A confirmation dialog appears. Click the Save button.
The Save As dialog appears.
● Select a location to save the backup configuration file.
● Click the Save button to complete the task.
● A Download Complete dialog appears – click Close.
To Restore a saved configuration:
● Under the heading Restore Configuration click the Browse button - a dialog opens for you to locate
and select the previously saved backup configuration file.
● Click the Restore Configuration button.
Do not attempt to cancel or interrupt this operation.
After the upload has completed it is necessary to restart the VoloAccess for the restored configuration
to take effect.