User manual

VoloAccess™ User Manual
Copyright © Vololink Pty Ltd 2006-2010 V1.43 July 2010 Page 47 of 78
Table of Supplementary Phone Services
Feature
Keypad sequence
General Settings
Inbound Caller ID enable
Inbound Caller ID disable
*30Flash
#30Flash
Outbound Caller ID enable
Outbound Caller ID disable
*31Flash
#31Flash
Call Waiting enable
Call Waiting disable
*43Flash
#43Flash
Volume Setting (Where Volume Level = 1 – 4)
#69*
[Level]
Flash
Inbound Caller ID Notes
This feature is only applicable for handsets that support Caller ID Display.
Call Divert
In the following section [number] is the number to divert to.
Note: The Country Code prefix of + is entered as **
Divert all Voice Calls enable
Divert all Voice Calls disable
*21*[number]*Flash
#21**Flash
Divert Call when Phone is Busy enable
Divert Call when Phone is Busy disable
*67*[number]*Flash
#67**Flash
Divert Call when No Reply enable
Divert Call when No Reply disable
*61*[number]*[delay]Flash
(where delay is 5 to 30 seconds)
#61**Flash
Divert Call when Not Reachable enable
Divert Call when Not Reachable disable
*62*[number]*Flash
#62**Flash
Call Diversion Notes:
1. If diversion of all voice calls is enabled and call diversion when either Phone is Busy or No
Reply or Not Reachable is enabled, it will first disable All Voice Calls Diversion and then
enable that particular diversion.
2. When diversion of all voice calls is enabled, this will override all other diversion settings.
Call Barring
You will need to obtain the password for Call Barring from your service provider.
All Call Barring disable
#330*<password>Flash
Bar all Incoming Calls enable
Bar all Incoming Calls disable
*35*<password>Flash
#35*<password>Flash
Bar All Incoming International Calls when Roaming enable
Bar All Incoming International Calls when Roaming
disable
*351*<password>Flash
#351*<password>Flash
All Incoming Call Barring disable
#353*<password>Flash
This section continued on next page…