User manual

VoloAccess™ User Manual
Copyright © Vololink Pty Ltd 2006-2010 V1.43 July 2010 Page 25 of 78
After enabling Failover, the WAN page changes to reflect the status of the primary and secondary
WAN interfaces and the WAN section of the navigation panel expands to include WAN Ethernet as
shown in the following image.
The WAN page displays the following:
Interface
The name of the Interface
Status
Displays the current status of the interface. Additional information may be
displayed, depending on the interface type. A connected interface has the status
"Connected”. Other status messages will depend on the type of interface. For
example a 3G interface may have a status of:
"Connected"
"Not connected, network not online"
"Not connected”
A WAN interface may have a status of:
"Connected"
"Bridged"
"Disabled"
"Connecting"
By default, the WAN port is Bridged – see Enable WAN Ethernet Port for further
information.
Other status messages may also be displayed.
Verified
Indicates whether the interface has passed the DNS resolution test.
Active
The active interface is marked with a blue icon.
WAN Failover is not yet fully configured – continue as follows: