Specification Sheet

CAYENNE
®
HEAT ’N SERVE 4/3 RECTANGULAR RETHERMALIZERS
Project:
Item Number:
Quantity:
Cayenne
®
Heat ’N Serve 4/3 Rectangular Rethermalizers
The Vollrath Company, L.L.C.
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: [phone] or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: [phone]
www.vollrath.com
Cayenne
®
Heat ’N Serve 4/3 Rectangular Rethermalizers
Cayenne
®
Heat ’N Serve 4/3 Rectangular Rethermalizers
DESCRIPTION
Cayenne
®
Heat ’N Serve 4/3 Rectangular Rethermalizers
provide maximum capacity within a minimum footprint. They
offer 33% greater capacity than full-size warmers and hold four
¹⁄₃ size pans up to 6" (15.24 cm) deep. 72788 includes 3
opening adaptor plate, 3 stainless steel insets, 3 hinged
covers and 3 one-piece ladles with black handles.
PERFORMANCE CRITERIA
The Cayenne
®
Heat ’N Serve 4/3 Rectangular Rethermalizers
are designed to take a container of cooked food from a chilled
state (below 40.0 F [4.4 C]) through the HACCP “danger
zone” of 165 F (73.9 C) in less than 90 minutes. The
performance standard is measured using the NSF mixture
chilled to 35 F (1.7 C). The electric unit will raise the
temperature of this product above 165 F (73.9 C) in less
than 90 minutes. The temperature will be maintained above
150 F (65.6 C) when the food product and pan or inset are
used with a standard pan or inset cover, the proper water level
is maintained in the well, and the food product is stirred
regularly.
Due to continued product improvement, please consult
www.vollrathco.com for current product specifications.
FEATURES
❑ Features Vollrath’s Direct Contact Heating System in which
the heating element is in direct contact with the water for the
most efficient heat transfer possible
❑ Thermoset fiber-reinforced self-insulating resin well provides
maximum energy efficiency, prevents scale build-up and is
easy to clean
❑ Two 800 watt heating elements for rethermalization and
faster recovery
❑ Cast-in non-stick aluminum dome heating element uses up
to 25% less energy and reduces scale build-up for easy
cleaning and longer operating life
❑ Increased water capacity reduces labor costs and improves
food quality by maintaining maximum moist heat
❑ Low-water indicator light eliminates guesswork
❑ Front access dials for easy temperature setting and
maintaining accuracy
❑ Lighted On/Off switch
❑ Capillary tube thermostat control supplies constant
temperature and power only when needed for maximum
power efficiency
❑ Wide dripless lip catches and drains moisture back into the
well and creates more uniform fit with food pans and insets
❑ Stainless steel exterior meets UL surface temperature
standards for operator and customer safety and
concentrates heat inside the well, not to the outside surface
and rim
❑ Meets NSF4 Performance Standards for rethermalization
and hot food holding equipment
❑ Non-skid feet help keep unit from sliding on countertop
❑ Bottom exit 6 ft. (183 cm) power cord adapts to receptacle
location for safe installation and allows for 360˚ control
placement
Item 72788
Item 72050
Agency Listings
Cover is
not NSF.
MODELS
72050 Model T43R without Drain (US)
72051 Model T43R with Drain (US)
72788 Model T43R without Drain Package (US)
72055 Model T43R without Drain (Canada Only)
72056 Model T43R with Drain (Canada Only)
WARRANTY: All models shown come with Vollrath’s standard
warranty against defects in materials and workmanship. For full
warranty details, please refer to the Vollrath Equipment and
Smallwares Catalog.
Approvals Date