Specification Sheet

CAYENNE
®
MODEL 1001 WARMERS
Project:
Item Number:
Quantity:
Cayenne
®
Model 1001 Warmers The Vollrath Company, L.L.C.
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Main Tel: [phone] or 920.457.4851
Main Fax: [phone] or 920.459.6573
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Technical Services
[e-mail]
Induction Products: 800.825.6036
Countertop Warming Products: 800.354.1970
All Other Products: 800.628.0832
www.vollrath.com
Due to continued product improvement, please consult
www.vollrath.com for current product specifications.
Approvals Date
Cayenne
®
Model 1001 Warmers
DESCRIPTION
Cayenne
®
Model 1001 Warmers are designed to attractively display
and maintain the serving temperature of your prepared foods with
less energy than a traditional warmer.
PERFORMANCE CRITERIA
Cayenne
®
Model 1001 Warmers are designed to hold heated prepared
foods at temperatures above the HACCP “danger zone” of 140 F
(60 C). The performance standard is measured using the NSF mix-
ture preheated to 165F (73.9 C). The unit will hold the temperature
of this product above 150 F (65.6C). The temperature will be main-
tained best when the food product is held using pans with covers, the
proper water level is maintained in the well, and the food product is
stirred regularly.
AGENCY LISTINGS
FEATURES
• Features Vollrath’s Direct Contact Heating System in which the
heating element is in direct contact with the water for the most
efficient heat transfer possible
• Cast-in non-stick aluminum dome heating element uses up to 25%
less energy and reduces scale build-up for easy cleaning and
longer operating life
• Thermoset fiber-reinforced self-insulating resin well provides
maximum energy efficiency, prevents scale build-up and is easy to
clean
• Increased water capacity reduces labor costs and improves food
quality by maintaining maximum moist heat
• Recessed controls reduce accidental changes in temperature
settings
• Low-water indicator light eliminates guesswork
• Capillary tube thermostat control supplies constant temperature
and power only when needed for maximum power efficiency
• Wide dripless lip catches and drains moisture back into the well
and creates more uniform fit with food pans and insets
• Stainless steel exterior meets UL surface temperature standards
for operator and customer safety and concentrates heat inside the
well, not to the outside surface and rim
• Meets NSF4 Performance Standards for hot food holding
equipment
• Non-skid feet help keep unit from sliding on countertop
• Bottom exit 6 ft. (183 cm) power cord adapts to receptacle location
for safe installation and allows for 360˚ control placement
WARRANTY
All models shown come with Vollrath’s standard warranty against
defects in materials and workmanship. For full warranty details,
please refer to www.Vollrath.com.
MODELS
Item No Model No Description
71001 1001 Full-Size Warmer