User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH

8.3.22.3 filter conditions

This command specifies one or more conditions (denied or permitted) to decide if the

packet is forwarded or dropped.

CLI Syntax: (permit|deny) any any IFNAME

Example: Switch(config-ext-macl)#permit any any 1

8.3.22.4 filter attach

This command is used to assign filter rule for a specific port.

CLI Syntax: mac access-group WORD in

Example: Switch(config-if)#mac access-group mac_acl_1 in

8.3.23 Port Access Control

8.3.23.1 default system authentication control

This command sets dot1x system authentication control to default.

CLI Syntax: default dot1x system-auth-control

Example: Switch(config)#default dot1x system-auth-control