User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH

Example: Switch>enable

8.3.3.4 Disable

Exit enable mode and turn off privileged mode command.

CLI Syntax: disable

Example: Switch#disable

8.3.3.5 End

This command lets the user end the current mode and go to enable mode.

CLI Syntax: end

Example: Switch(config)#end

8.3.3.6 Exit

This command lets the user end the current mode and go to the previous mode.

CLI Syntax: exit

Example: Switch#exit

8.3.3.7 Help

This command lists all the commands of the operational mode.

CLI Syntax: list

Example: Switch#list

Example: Switch#?

8.3.3.8 Host name

Displays the given name of the switch. This is an RFC-1213-defined MIB object in

System Group, and provides administrative information on the managed node.

CLI Syntax: hostname WORD

Example: Switch(config)#hostname Switch

If the user enters a name in the name description field, the Switch’s system name

changes to the new one.

8.3.3.9 Date

Set system date/time.

CLI Syntax: date STRING(MMDDhhmmYYYY)