User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH

Access Control List Rule

7.9.2 Apply Access Control List

An ACL rule is idle if it is not attached to any ingress port. Use the Apply Access Control

List page to attach a filter set to ingress ports.

Click Submit to save changes to RAM memory. Click Refresh to view effect of changes.

To make all changes permanent in Flash memory, go to Save Configuration page

(bottom of management menu) and click Save.

To apply an ACL rule to ports:

Attach to all ports: the ACL rule applies to all the ports of the system.

Attach to certain ports: the ingress ports to be applied can be specified.