User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH
7.8.3.2 Groups
VACM Group is used to configure the information of SNMPV3 VACM Group.
Group Name: enter the security group name.
Read View Name: enter the Read View Name that the Group belongs to. The related
SNMP messages are Get, GetNext, GetBulk.
Write View Name: enter the Write View Name that the Group belongs to. The related
SNMP message is Set.
Notify View Name: enter the Notify View Name that the Group belongs to. The
related SNMP messages are Trap, Report.
Security Model: enter the Security Model Name that the Group belongs to. Any is
suitable for v1,v2,v3. USM is SNMPv3 related.
Security level: enter the Security level Name that the Group belongs to. Only NoAuth,
AuthNopriv, AuthPriv can be chosen.
SNMPv3 VGU Table – Groups
7.8.3.3 Users
USM User is used to configure the information of SNMPV3 USM User.
User Name: User name of a specific security group
Group Name: enter the security group name
Auth Protocol: enter the Auth Protocol that SNMP User and Security Group belong.
Only NoAuth ,MD5, SHA1 can be chosen. If the NoAuth is chosen, there is no need
to enter password.
65