User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH
Dynamic Addresses
7.7.9 Static Addresses
The user can add a MAC address to the switch address table. The MAC address added
in this way will not age out from the address table. These are called static addresses.
MAC Address: enter the MAC address
VLAN ID: enter the VLAN ID that the MAC belongs to
Stack ID: For a standalone switch, only ID 1 is available
Port Selection: select the port which the MAC belongs to
Click Add to create a new static MAC address with the above information (temporary
until Submit is clicked). Click Remove to remove a selected entry (temporary until
Submit is clicked). Click Modify to update an existing MAC address entry (temporary
until Submit is clicked).
Click Submit to save changes to RAM memory. Click Refresh to view effect of changes.
To eventually make all changes permanent in Flash memory, go to Save Configuration
page (bottom of management menu) and click Save.
56