User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH

Multicast Route – IGMP

7.6.4.2 M.R. – DVMRP

This function is used to configure DVMRP.

Network DVMRP is: Enable or disable DVMRP for specific network.

Select the corresponding “Network Address” to configure parameters then click on the

Modify button. The field you changed will update the content in the display window. To

save any changes and make it effective immediately, click Submit. Use Refresh to

refresh the setting.

NOTE: Before setting this page, make sure that the “IP Multicast Route Mode” on the

IGMP page is set to “DVMRP”.