User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH

OSPF – Interfaces

7.6.3.3 OSPF – Area

This function is used to configure OSPF areas

Select an Area: Input area ID to be configured

Default Cost: Default cost for a stub area sending packet to outside world

Stub: a stub area, at the edge of an AS, is not a transit area since there is only one

connection to the stub area. Use this attribute to specify characteristics of this area

(no defined – not a stub area, no-summary -- do not inject inter-area routes into stub,

and summary -- allow injecting inter-area routes into stub)

Shortcut: enable or disable shortcut of the OSPF area (no defined, disable, enable)