User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH

Ethernet Link: the link is connected or not connected.

STP Status: STP is enabled or disabled on the port

Duplex: the duplex mode

Speed: link speed

Flow Control: the setting of 802.3x flow control mechanism on both directions of the

port

Physical Interface – Runtime Status

7.4 lP Interface

This function allows users to see the Layer 3 interface status in real time. Users can

also configure the interface in the following fields:

Interface: Select the interface to be configured (vlan1 is used by the system).

IP: Interface IP address

Mask: Interface Subnet mask

MAC: Mac address of this interface

Status: up/down status of this interface

DHCP IP Helper Addr: The DHCP Helper Address is the IP address of your DHCP

server.

Select the corresponding interface and configure the interface parameters – then click

on the button. The field you changed will update the associated content in the display

window. To save any changes and make it effective immediately, click Submit. Use

Refresh to refresh the display.