User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH
7.3 Physical Interface
7.3.1 Port Status
7.3.1.1 Interface Configuration
The Physical Interface displays the Ethernet port status in real time. You can configure
the port in the following fields in Interface Configuration Window:
Port: select the port to configure
Status: disable/enable the port
Mode: set the speed and duplex mode
Flow Control: enable/disable 802.3x flow control mechanism
DHCP-Snooping: enable/disable DHCP snooping function
Snooping: assign the selected port to be a trusted or not trusted port
Select the corresponding port number and configure the port setting, then click on the
Modify button. The field you change will update the content of the display window.
However, the new settings do not take effect until the Submit button is clicked.
Click Submit to commit the settings. Click Refresh to display current settings of the
Switch.
To eventually make all changes permanent in Flash memory, go to “Save
Configuration” page (bottom of management menu) and click Save.
Physical Interface – Interface Configuration
7.3.1.2 Runtime Status
This window displays the following information for each port:
28