User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH
7.1.1 Standard GUI buttons
Click New to create a new entry for editing to the table (temporary until Submit is
clicked).
Click Add to add the new entry to the table (temporary until Submit is clicked).
Click Modify to temporarily save changes to an existing entry (temporary until Submit is
clicked).
Click Remove to remove selected entry (temporary until Submit is clicked).
Click Attach All to select all ports for a selected entry (temporary until Submit is clicked).
Click Detach All to unselect all ports for a selected entry (temporary until Submit is
clicked).
Click Submit to save changes to RAM memory of the Switch.
Click Refresh to display current settings of the Switch for viewing the effect of changes.
To eventually make all changes permanent in Flash memory of the Switch, go to “Save
Configuration” page (bottom of management menu) and click Save. Submit only
configures the Switch hardware and saves the settings to RAM memory and such
changes will be lost if the Switch is powered off.
Clicking Submit only saves the information to the Switch’s
RAM memory and changes will still be lost if the Switch
is powered off. To save changes permanently in the
Switch’s Flash memory, click on the “Save Configuration” button of the Switch’s
management menu. Once the “Save Configuration” page appears, click Save to store
all configurations in Flash memory permanently.
Warning
7.2 System
System pages include Management, IP Setup, Reboot, and Firmware Update function.
7.2.1 Management
The Management page contains the following information:
Model Name: product name
MAC Address: Switch MAC address
System Name: user-assigned name to identify the system (editable)
System Contact (editable)
System Location (editable)
Click Submit to commit the settings. Click Refresh to display current settings of the
Switch.
To eventually make all changes permanent in Flash memory, go to “Save
Configuration” page (bottom of management menu) and click “Save”.
25