User manual

VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH
7 Web Management
The Switch provides Web pages that allow equipment management through the Internet.
The Java Runtime Environment (JRE) is required to run Java applet programs that are
automatically downloaded from the Switch during management functions. (See section 7
above).
7.1 Log into Web Management
From a PC, open your web browser, type the
following in the web address (or location) box:
http://192.168.0.254 and then press <Enter>.
This is the factory default IP address for the
switch. A login screen is displayed, as shown
in the figure on the right:
Configuration manager login screen:
Enter your user name and password, then
click OK.
Use the following defaults the first time you log into the program. You can change the
password at any time through CLI interface (see section 6.3.1).
Default User Name: admin
Default Password: admin
The home page appears each time you log into the program. See figure below:
The meanings of the green and orange buttons are further explained in the next section.
24