User`s manual

VOLKTEK IRF-633 RS-232/422/485 TO 100BASE-TX DEVICE SERVER
31
On the following screen, press Start button. If the link is function well, the following
screen will appear.
If the link has trouble, the error message will appear. To solve the problem, please
check the following:
a) Whether IP address and Port numbers are correct.
b) Fiber cable is properly connected to Ethernet.
c) DIP Switch 7 is correctly selected (4Wire and 2Wire Mode).
Once the link is established, you can manage the serial device attached to the device
server from remote workstation installed Serial IP Redirector software.