User`s manual

VOLKTEK IRF-633 RS-232/422/485 TO 100BASE-TX DEVICE SERVER
28
Click on each parameter field to modify the desired setting, then click on Undo to
restore previously saved configurations or click on Save to retain newly entered
information. See descriptions below:
Parameter Description
IP Address
Community Name
Status
Enter the IP address of terminals for when abnormalities on a
connection occur and an alarm to be sent. Enter their
community names and disable or enable their alarm function
accordingly
Enter their community names
Disable or enable their alarm function
6.3.9 System Restart
Users can restart/reset the system via software from a remote location.
Restart Options
Clicking on the Restore button will set the device server / managed
media converter back to factory defaults. All saved configurations
will be lost.