User`s manual

VOLKTEK IRF-633 RS-232/422/485 TO 100BASE-TX DEVICE SERVER
27
6.3.7 SNMP Community Configuration
You can use an external SNMP-based application to configure and manage the Device
Server / Managed Media Converter. This management method requires the SNMP
agent on the Device Server / Managed Media Converter and the SNMP Network
Management Station to use the same community string. This management method, in
fact, uses two community strings: the Get community string and the Set community
string. If the SNMP Network Management Station only knows the Set community string,
it can read and write to the MIBs. However, if it only knows the Get community string, it
can only read MIBs. The default Get and Set community strings for the Device Server /
Managed Media Converter are public and private respectively.
If needed, assign the new parameters and press Save to implement the settings.
6.3.8 IP Trap
The following figure and table describe how to specify management stations that will
receive authentication failure messages or other trap messages from the Device Server
/ Managed Media Converter. Up to 5 trap managers may be assigned.