User`s manual

VOLKTEK IRF-633 RS-232/422/485 TO 100BASE-TX DEVICE SERVER

6.3.3 RS-232/422/485 Transfer Configuration

This page offers the selection between Device Server and Media Converter mode.

Please select the appropriate required for your application. User can also monitor the

serial port status and configure TCP port number from this menu.

A. Serial Port Config. window will show you the serial port configuration and allow to

assign the TCP port number to operate via Serial IP Redirector software for

Device Server mode.

B. The unit also offers two modes (Device Server Mode / Media Converter). Please

restart the unit after selecting the mode to take effect.

Note: In case of using Media Converter Mode, recommend to keep Packet Mode

option Disable.

A detailed explanation of the setting choices are given underneath the following

screenshot: