User`s manual

VOLKTEK IRF-633 RS-232/422/485 TO 100BASE-TX DEVICE SERVER
20
You can use an external SNMP-based application to configure and manage the Device
Server / Managed Media Converter. This management method requires the SNMP
agent on the Device Server / Managed Media Converter and the SNMP Network
Management Station to use the same community string. This management method, in
fact, uses two community strings: the get community string and the set community
string. If the SNMP Network Management Station only knows the set community string,
it can read and write to the MIBs. However, if it only knows the get community string, it
can only read MIBs. The default get and set community strings for the product are
public.
6.1.7 System Restart
This menu allows users to restore the factory default setting for the Device Server /
Managed Media Converter and/or to reset the system manually. Selecting this option
will lead to another window with the following two options to select.
System Restart Menu
Restore Factory Default Settings
Selecting this option will lead to restore factory default settings to the device server /
managed media converter. Highlight the field and hit the <ENTER> key to execute.
System Restart
The System Restart allows a user to perform a ‘warm’ restart and validate newly saved
configuration to the device server / managed media converter. Highlight the System
Restart field and hit the <ENTER> key to reset the unit.
After each configuration session, be sure to set DIP switch 1 to the
‘OFF’ position. Otherwise, the unit will not transmit any data.