User`s manual

VOLKTEK IRF-633 RS-232/422/485 TO 100BASE-TX DEVICE SERVER
19
6.1.6 SNMP Configuration
Use the SNMP Configuration screen to display and modify parameters for the Simple
Network Management Protocol (SNMP). The product includes an onboard SNMP
agent that monitors the status of its hardware as well as the traffic passing through its
ports. A computer attached to the network, called a Network Management Station
(NMS), can be used to access this information. Community strings control access
rights to the agent module. To communicate with the Device Server / Managed Media
Converter, the NMS must first submit a valid community string for authentication.
SNMP Configuration
The options for configuring community strings and related trap functions are described
as below.
Use the <Tab> and <Enter> keys as previously. Enter the IP address of computers for
when abnormalities on a connection occur and an alarm to be sent. Enter their
community names and disable or enable their alarm function accordingly. See
descriptions below:
Parameter Description
Index
Status
IP Address
Community
Number assigned to each trap
Disable or enable their alarm function accordingly
Enter the IP address of computers for when abnormalities on
a connection occur and an alarm to be sent. Enter their
community names and disable or enable their alarm function
accordingly
Enter their community names