User`s manual

VOLKTEK IRF-633 RS-232/422/485 TO 100BASE-TX DEVICE SERVER

6.1.3 RS-232/422/485 Transfer Configuration

The RS-232/422/485 menu is applicable to all RS-232/RS-422/RS-485 modes. Before

using data transfer mode option for the Device Server / Managed Media Converter,

move the DIP Switch 1 to OFF position.

In case the device is used in Device Server Mode:

You can assign the TCP port number to monitor and access the serial device via

device server over the network/Internet from a workstation using Serial IP Redirector

software. (The TCP port number can be of any number from 1024 to 65535).

The 2 screenshots below show the different screen options when selecting Device

Server mode in the DS/CR Mode setting (top) or Converter mode (bottom):