User`s manual

VOLKTEK IRF-633 RS-232/422/485 TO 100BASE-TX DEVICE SERVER

If using the Menu-driven interface. Select the System Information from the Main Menu

and following screen will appear. Use TAB key to move the cursor and <Enter> to

change the value. Once change the value, select <SAVE> to apply the changes.

After entering the new IP address. The system will confirm whether the operation is

successful.

NOTE:

Copy the new address down on a piece of paper. You will need the address when you

are going to use Telnet or set up data transfer/communication connection.

Warning

IP addresses are unique! If an address isn’t available, please contact the

appropriate authorities to apply for one.

5.2 Telnet Access

The Device Server / Managed Media Converter is accessible via a Telnet. At the

command prompt type telnet 192.168.0.254 (If connecting with default IP). You will be

prompted to Enter user name and password as mentioned and shown in the topic

Console Port Access. Use CLI or Menu-driven interface to perform the changes.

NOTE:

The only limitation of Telnet Access is that users can not assign new IP address to

device server. Please use Console Port Access or Web Access to assign new IP

address.