Technical data

58
Switching on
The ADC system can be switched on at a driving
speed of between 30 and 180 km/h.
The keys have the following functions:
- The SET key adopts the current speed
as the desired speed. Repeated pressing
reduces the desired speed by 1 km/h each time.
- The RES key adopts the previous desired speed.
Repeated pressing increases the desired
speed by 1 km/h each time.
- The +GRA key or the -GRA key increases
or reduces the desired speed in increments of
10 km/h.
Switching off
- ON/OFF key, desired speed is lost
- CANCEL key, desired speed is maintained
- Stepping on the brake pedal
- Excessive application of the accelerator
- Selector lever in P, R, N
- Driving speed outside of the range
of 30 to 180 km/h
- Application of ESP, ASR, MSR, ABS
Electrics
Conditions for switching on and off the ADC
ADC system status is influenced by the left bank of buttons on the multifunctional steering wheel, the
accelerator, the brake pedal, the selector lever, as well as by the engagement of the vehicle's built-in
braking system.
The ADC system is always in a 'non-ready state' when the engine is started and has to be switched to
stand-by by pressing the ON/OFF key.
270_201