User manual

5.
3D-Ready™ Projectors with VESA output
- Use the VESA cable to power and synchronize the SmartCrystal™ Pro. No need to use
a power cable when running in VESA mode.
DLP Projectors without VESA output
- Connect the power cable to any USB socket. If needed, you can use the universal
power adapter. After connecting the cable, the DLP-Link technology integrated in the
SmartCrystal™ Pro will automatically synchronize the image.
5.2 Installation
The SmartCrystal™ Pro should be placed directly in-front of the lens of the projector at a
distance such that the image from the projector covers as much as possible the entire
area of the polarization window in order to minimize thermal heating effects. A distance
of between 20mm and 50mm is normally recommended for this purpose.
5.3 Start
There is no on/off switch. The system starts as soon as it is connected to a power source.
Ensure the SmartCrystal™ Pro is positioned directly in-front of the lens of the projector
and that the side marked “PROJECTOR SIDE” is facing towards the projector.
5.4 Settings
No adjustment is needed for standard use. For professional use, the SmartCrystal™ Pro
can be connected to a computer via the USB cable, allowing the user to adjust the
settings of the LCD to optimize image quality for any venue. Please contact your
system’s distributor/integrator for this operation.
Important : in case of dual connection, the VESA synchronization mode is given priority.
The µUSB/USB cable provided by Volfoni must not be used to power the SmartCrystal™
Pro. This cable only serves to make specific settings or updated the software version of
the product. The SmartCrystal™ Pro must be powered only by the Jack/USB cable for
DLP-Link synchronization or the Mini DIN3/Jack for VESA synchronization.
5.5 Software Update
A software is available on Volfoni website to update your product.
How to use the software update:
- Go to Volfoni website (www.volfoni.com)
- Choose the menu SERVICES/SUPPORT
- Then DOWNLOAD
- Download the software VOLFONI LOADER
- Connect your computer to SmartCrystal™ Pro with the cable µUSB /USB cable
supplied by Volfoni
- Verify that the software recognizes your system
- Once the SmartCrystal™ Pro is connected, press CHECK FOR UPDATE
- Load the latest version if it's not already in your SmartCrystal™ Pro
Not optimized Optimized Out of the limits
20mm 30mm
FORBIDDEN AREA
SmartCrystal
™
Pro
positionning area
Projector