Specifications

4.
2. REQUIREMENTS
To use the SmartCrystal™ Cinema product, 3D content is required together with, a polarization preserving silver screen, a cinema projector and pas-
sive circular polarized 3D glasses.
Projector
Most types of 3D Projectors Cinema projectors are compatible with the SmartCrystal™ Cinema.
DLP (Digital Light Processor) projectors are especially efcient for 3D projection. The system is easy to set-up with a DCI-compliant DLP projector and
operates with projector lamps up to 7KW.
LCD™ (Liquid Crystal Display) and LCoS™ (Liquid Crystal on Silicon) projection technologies, such as JVC’s D-ILA™ and Sony’s SXRD™, generate
a polarized light beam that may not be compatible with the SmartCrystal™ Cinema’s active polarization system. Please consult with Volfoni for
additional information.
Polarization Preserving Silver Screen
In order to enjoy the best quality 3D images, a polarization-preserving silver screen designed for 3D projection is required. If your screen was not
manufactured specically for 3D use, you might experience uncomfortable and blurry 3D images with a high level of cross talk.
The SmartCrystal™ Cinema is used for projection with screen sizes up to 18 meters (60 feet) together with a 2,4 screen gain.
3D Polarized Glasses
The SmartCrystal™ Cinema is compatible with most passive 3D glasses commonly used(circular-polarizing only). Please contact Volfoni (contact@
volfoni.com) should you be interested in our line of passive 3D Glasses.
3D screen
3D Source
Tri-DLP 3D projector
Users with passive glasses
Image 3D
Synchro 3D
SmartCRYSTAL
TM
CINEMA
3. SMARTCRYSTAL™ CINEMA FEATURES
3.1 - Technical specications
- Maximum power of projector: 7 KW
- Maximum switching speed: 192/200Hz
- Optical light efciency: > 16%
- Power supply: 110V/240V 50/60Hz
- Operating temperature: +10°C to +55°C (50°F to 131°F)
- Storage temperature: -10°C to+55°C (14°F to 131°F)
- Dimensions of the SmartCrystal™ Cinema are shown at the end of this manual.
3.2 - General specications
- Mechanical-housing material in Aluminium
- New Surface Switching Technology™ with crisp and bright images
- Upgradeable software for optimal 3D performance
- Meets all standards for electronics approved by CE
- Approved by Hollywood Studios
- 3 years guarantee. The SCC Polarizer Module and the SCC Electronic Module, can be separately replaced should this be required.
- For use with lightweight 3D circular polarized viewing glasses
- Passive 3D glasses are available from Volfoni. Please contact us for more details.
3.3 - Electrical specications
- V= 240 / 110 V AC.
- F = 50 / 60 Hz.
- P = 35 W.
- The unit has a built in safety cut circuit.
- The system is supplied with two different power cables, a European model and an American model.
- This equipment should be electrically grounded.
- The electrical circuit will detect any current peaks generated in the system and the system will be shut-down should this occur, Thereafter, it
will be necessary to re-start the system once has been rectied the fault.
- In case of malfunction, one of the LED indicators on the control board will illuminate and the system will be shut-down. Thereafter, the fault
should be rectied before re-starting the system.
- To rectify any indicated faults, please contact your dealer, installer or the manufacturer directly stating the model number shown in the
silver label of the product.
3.4 - Setting of Projector
To use the SmartCrystal™ Cinema, the 3D projector should be set as below :
• Dark Time : 1200 µs
• Delay : 0 or -1000 µs