Specifications

12.
A software is available on Volfoni website to update your product.
How to use the software update:
- Go to Volfoni website (www.volfoni.com)
- Choose the menu SERVICES/SUPPORT
- Then DOWNLOAD
- Download the software VOLFONI LOADER
- Connect your computer to SmartCrystal™ Cinema with the cable USB-A /USB-B (cable not supplied by Volfoni)
- Power your SmartCrystal™ Cinema
- Verify that the software recognizes your system
- Once the SmartCrystal™ Cinema is connected, press CHECK FOR UPDATE
- Load the latest version if it’s not already in your SmartCrystal™ Cinema
9. TROUBLESHOOTING
8. SOFTWARE UPDATE
PROBLEM SOLUTION
The system does not work. Verify that the Power LED is illuminated. If it is OFF, this indicates that
there is a problem with the power-supply of the system.
Check that the SmartCrystal™ Cinema electronic module is cor-
rectly mounted in the bracket.
Check that the power supply is connected and that the system is
in the power ON state.
Should the error persist, please contact your technical support.
SYNC LED does not illuminate. Ensure the jack cable is connected to the SmartCrystal™ Cinema
Polarizer Module.
Red continuous light.
(Sync LED)
The system is powered but there is no synchronization signal. Ensure
the 3D mode is selected in the setup of your 3D synchronization
source.
The LED ashes correctly but no 3D images are shown.
(Sync LED)
Ensure the SmartCrystal™ Cinema is facing the right way (i.e the
side marked PROJECTOR SIDE should be facing the projector).
Check that the projection screen is 3D-compliant (silver screen
whit gain 2,4), content is 3D, and the projector is running in 3D
mode.
The LED for “state motor” illuminates in red. In such case, please contact directly your technical support.
Do not touch the electronics of the SmartCrystal™ Cinema.
The LED for “state fan” lights in red. In such case, please contact directly your technical support
Do not touch the electronics of the SmartCrystal™ Cinema.
It is not possible to lower the window of the SmartCrystal™
Cinema Polarizer Module
Check that key-button « LOCK/UNCLOCK » is not in the LOCK
position. Should this be the case, please turn the key-button to
the UNLOCK position to lower the window of the SmartCrystal™
Cinema into the Bracket.
For other problems, please contact your technical support.
10. IMPORTANT SAFETY RECOMMENDATIONS
• Protect all parts of the 3D system from direct sunlight, heat or water.
• Extreme conditions may alter the product’s performance.
• Do not modify the electrical or mechanical components of your 3D system.
• Do not apply force to the window of the polarization modulator.
• Do not touch the polarization window.
• Avoid vibrations and shock.
• Use a clean soft cloth when cleaning the polarization modulator to avoid scratching.
• Always transport the SmartCrystal™ Cinema system with the window of the SmartCrystal™ Cinema Polarizer Module lowered into the bracket
to avoid scratching the LCD or the frame.
• In case of problems with the cooling ventilation system, turn off the projector, and contact your technical support.
• In case of damage to the SmartCrystal™ Cinema where the skin is exposed to liquid crystal material, we recommend that you immediately
wash the area with soap and water.
• In case of eye exposure to liquid crystal material, please seek medical advice immediately.
• Please note the viewing glasses must not be used as sunglasses.