User Manual

10 / 12

NOTE: This checklist is NOT intended to replace the content included in this instruction

manual. Althought it can be used as a quick start guide, we strongly suggest that read

all though the manual completely before proceeding.

- Always turn the transmitter on rst.

- Ensure the throttle control stick is at bottom position before connecting the battery.

- Fly the model(hand-launch or take off from a at/level surface).

- Land the model(on a at/level surface).

- Unplug the battery from ESC.

- Always turn off the transmitter last.

Flight Checklist

Propeller Saver Instruction

The propeller saver keeps the propeller

from damage, and prevent the electronic

components from over current.

When the airplane hits any obstacle, the

propeller will loose from the base.

To install the propeller back to the base,

insert the upper part centerly through the

motor shaft, and hearing a "click" sound to

ensure it is secured.

Follow below steps to replace broken propeller and shaft adaptor. You will need help of

a Philips screw driver and pliers(not included).

1. Take off the spinner and propeller by loosen the screw with a Philips screw driver.

2. Take off the shaft adaptor carefully. If it is too tight, use pliers to help.

3. Replace any part broken.

4. Install all parts back by inverted orders to nish the replacement.

Base

Upper

Part

Upper

Part

Upper

Part

Spinner Spinner

Screw

Propeller

View 1 View 2

Propeller

Motor

Shaft