Owners manual

INS19835
140 Blaze Industrial Parkway, Berea, OH 44017 l P: 440.891.0999 F: 440.891.1868
7
03/21/2018
[e-mail] l www.volant.com
2017-2018 FORD RAPTOR & F-150 ECOBOOST 3.5L
Closed Box Air Intake
Pro 5 Part #: 19835, DryTech 3D Part #: 19835D, PowerCore
®
Part #: 198356
INSTALLATION INSTRUCTIONS
VOLANT INTAKE
11. Attach the filter adapter to the Volant air box
using the provided 3 bolts, flat washers, and lock
washers and a 10MM wrench or socket.
12. Install air temp sensor from Removal Step 9
with the tab facing the short end of the duct, as
shown.
13. Install the hump hose onto the Volant air duct
along with two #64 clamps and tighten using a
ratchet and 8mm socket or flat head screwdriver.
Leave clamp on open end of hump hose loose.
14. Install the straight sleeve onto lower factory inlet
with #64 clamp. Tighten clamp using a ratchet
and 8mm socket or flat head screwdriver. Leave
clamp on open end of straight sleeve loose.
15. Insert larger end of reducer onto Volant air duct
using #56 clamp. Place #48 clamp on the smaller
side. Tighten #56 clamp only using a ratchet and
8mm socket or flat head screwdriver.
16. Install Volant air duct into vehicle by placing the
hump hose onto the filter adapter. Then place
reducer onto the upper stock inlet. Rotate duct
down and into the straight sleeve.
Continued on Next Page . . .