Product: Turntable Model No.: 1931 1.45 turn adapter 2.Turntable 3. Gravity hammer 4.
5.Tone boom lift 6.Tone Arm 7. Turntable rotation switch 8. Turntable turn knob 9. Tone adjustment knob switch 10. Phono 11. Speaker 12. Power socket 13. Audio output jack Installation Notes 1. Open the package and take out the machine, then take out the foam on the machine board, and take out the power adapter and plug. 2. Put the gravity hammer on the stick and push it until it gets stuck. 3.
This unit is a standard 3-speed turntable player and can play 33/45/78 rpm records 1. Turn the function knob to the turntable function 2. Put the record on the turntable (Note: Play a 45-turn record, if necessary, put the 45-turn adapter on the turntable shaft) 3, the speed to the speed corresponding to the record 4. Untie the cable on the tone arm, remove the tone arm clasp, lift the lifting frame, move the tone arm to the position above the record you want to play, and then lower the lifting frame.
. Turn off Bluetooth pairing and turn off the power switch. Specifications 1. Product: Belt Drive Phono 2. Basic specifications Power: DC 12V 2.0A Product size: 420 * 340 * 160mm Sound size: 140 * 130 * 200mm * 2 Power consumption: 30W 3. Turntable specifications Motor: DC motor Drive mode: Belt drive Speed: 33, 45, 78RPM 4.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
