User manual

42
7. Configuration
7.1 Log in the Webpage
Configure Reset to Factory by the following steps:
1．
Please connect VP-2009 and PC to the same router/switch, or connect PC to
VP-2009’s PC port. In the VP-2009’s Advanced Setting-> LAN, configure LAN
port as Bridge mode.
2．
Configure PC’s IP address assignment method as “DHCP”, and restart PC.
3． Open the browser in PC, enter VP-2009’s IP address, for example
http://192.168.5.92, press Enter button, the log in dialog will showed as
Picture 7-1.
Picture 7-1
4． Enter user name and password, and press <OK> button.

The account can be admin or user.
 The user name and password of admin are both admin by default.
 The user name and password of user are both user by default.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]