User manual

40
3. In the Enable Codecs List, press Up/Down button to choose the codec, and
then press <
F2>and <F3> to make the priority higher or lower respectively.
4． Press <F1> to save the changes and get back to the previous page.
6.2.6.3 Video Codes Priority
VP-2009 supports 3 kinds of video codecs, when there are more
than one codec
chosen, the priorities will be ordered by descending order.
Configure Video by the following steps:
1． In “Call Settings” page, press Up/Down button to choose “Video Codecs
Priority” option, press <OK> to enter configuration page;
2. In the Disable/Enable Codecs List, choose the codecs by Left/Ri
ght button,
press <OK> to disable/enable the chosen codec.
3. In the Enable Codecs List, press Up/Down button to choose the codec, and
then press <
F2> and <F3> to make the priority higher or lower respectively.
4． Press <F1> to save the changes and get back to the previous page.
6.2.7 Update Application
VP-2009 supports 3 update methods: manual update, Boot Update and Time
update.
Configure Update by the following steps:
1． In “Advanced” page, press Up/Down button to choose “Update Application”
option, press <OK> to enter configuration page;
2．
Press Up/Down button to choose the proper option, press <OK> to confirm
the change.
3．
Press Up/Down button to choose and fill in “Update Server”.
4． Press <F1> to save the changes, press <F2> to update immediately.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]