User manual

6.2.5 Browser
Configure Browser by the following steps:
1．
In “Advanced” page, press Up/Down button to choose “Brower” option, press
<OK> to enter configuration page;
2．
Enter the website address as “Homepage”;
3． Press <F1> to save the changes and get back to the previous page.
4. In the “Menu” page choose “Browser”, press <OK> to get into the homepage
set before.
6.2.6 Call Settings
6.2.6.1 Bandwidth and Frame Rate
Configure Bandwidth by the following steps:
1．
In “Call Settings” page, press Up/Down button to choose “Bandwidth and
Frame Rate” option, press <OK> to enter configuration page;
2．
Press Up/Down button to choose “Bandwidth” option , press <OK> to pop up
the pull-down menu, choose the proper bandwidth, press <OK> to confirm
the change.
3. Follow the above steps to set the “Frame Rate” option.
4．
Press <F1> to save the changes and get back to the previous page.
6.2.6.2 Audio Codes Priority
The device supports 7 kinds of voice codecs, when there are more than one codec
c
h
osen, the priorities will be ordered by descending order.
Configure Audio by the following steps:
1． In “Call Settings” page, press Up/Down button to choose “Audio Codecs
Priority” option, press <OK> to enter configuration page;
2．
In the Disable/Enable Codecs List, choose the codecs by Left/Right button,
press <OK> to disable/enable the chosen codec.
39
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]