User manual

36
Attention：
If the Auto Answer is enabled by the called party, when a
new call is coming, the device will auto
answer the call after the specific period which is set in the type.
6.1.8.4 Call Waiting
Configure Call Waiting by the following steps:
1．
In “Call Setting” page, press Up/Down button to choose “Call Waiting” option,
press <OK> to enter configuration page;
2．
Press <OK> to enable/disable Call Waiting function;
3． Press <F1> to save and get back to the “Call Setting” page.
Attention：
If the Call Waiting is enabled by the called party, when a new call is coming in, the device will
sound a “Du…”, then the LCD indicates the new coming call, the caller will hear the ring
back tone.
6.1.8.5 Forward Setting
Configure call forward by the following steps:
1． In “Call Setting” page, press Up/Down button to choose “Forward Setting”
option, press <OK> to enter configuration page;
2． Press Up/Down button to choose a forward type: Disable, Always Forward,
Busy Forward or No Answer Forward.
3. If you choose “No Answer Forward”, you should also set the no answer times.
4．
Press <F1> to save and get back to the “Setting” page.
6.2 Advanced Settings
In the Desktop status, press <F3> to get into the “Menu” page, then press
<OK> to get into “Setting” page. Press <OK> to pop up the “Admin Password”
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]