User manual

1． In “Setting” page, press Up/Down button to choose “Phone Settings”; press
<OK> to enter;
 Display Name: Press Up/Down button to choose and input “Display
Name”.
 Language: Press Up/Down button to choose “Language” option, press <OK> to pop up the
pull-down menu, press Up/Down to choose the language; press <OK> to confirm the change;
 Call Option:
Press Up/Down button to choose “Call Option”, press <OK> to pop up the
pull-down menu, choose audio or video call as default call mode;
2．
Press <F1> button to save the changes and get back to the “Settings” page.
 Note：
When the information of an incoming call is not recoded in th
e Contact List, its phone name and
number will show in the LCD.
6.1.4 Tones and Volume
Configure Tones and Volume parameters by the following steps:
1．
In “Settings” page, press Up/Down button to choose “Tones and Volume”
option, press <OK> to enter;
2．
The details of configuration:
 Ring Tone
: Press Up/Down button to choose the “Tone” option, press <OK> button to pop up
the pull-down menu, press Up/Down button to choose the ring tone; press <OK> to confirm the
selection;
 Volume: press Up/Down button
to choose “Volume” option, press Left/Right button to adjust
the volume;
3．
Press <F2>to pre-listen the ring tone.
4． Press <F1>to save the changes, and get back to “Settings” page.
6.1.5 Date and Time
Configure Date and Time by the following steps: 、
31
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]