User guide

34
NetComm Wireless NB16WV-02 User Guide
www.netcommwireless.com
Ver 1.2
Ethernet WAN
WAN Type: You can select from the following WAN types:-
Dynamic IP
Static IP
PPP over Ethernet
PPTP
L2TP
Dynamic IP Address
OPTION
DEFINITION
WAN Interface
The interface to configure. When Mobile Broadband is selected, you may also configure whether the connection is active
or inactive.
WAN Type
Use the drop down list to select the type of WAN connection you want to use.
Remote Host for keep alive
A host name to use for the keep alive function. This host will be used to send a ping request in order to keep the
connection alive.
Host Name
Set the hostname for your connection
(Optional - Refer to your ISP for more information) .
ISP Registered MAC Address
You can change the WAN port MAC address if needed to clone your 3G modem
(Optional - Refer to your ISP for more information) .
NAT
This option enables or disables "Network Address Translation" for this connection type.
Multicast
Allows you to select the method of multicast or disable it.
IGMP Snooping
Allows you to enable or disable IGMP Snooping. IGMP Snooping configures the router to listen to IGMP conversations
between hosts and routers and maintain a map of the links that need IP multicast streams.
VLAN TAG
VLAN tagging is primarily used in virtual networks which span over multiple switches. VLAN tagging involves the router
inserting a VLAN ID into a packet header in order to identify which CLAN the packet belongs to. You may enable VLAN
tagging and specify the ID with a value between 1 and 4094.