User guide

www.netcommwireless.com
NetComm Wireless NB16WV-02 User Guide
23
Ver 1.2
Mobile Broadband
The following configuration options are available on the Mobile Broadband tab:
Country
Service Provider
Network Name (APN)
SIM Status
PIN
Confirm PIN
To configure your 3G/4G (Mobile Broadband) connection, select the applicable Country and Service Provider. The Network Name
(APN) should be automatically filled with the correct APN. Please verify this with the information supplied by your 3G/4G provider.
The SIM Status will show if a PIN is required to use your SIM. If it is, enter the SIM PIN into the PIN and Confirm PIN fields.
If you make any changes to the 3G configuration, click the Save and apply the changes button to make these changes active.
Note: Saving any configuration changes on this page will make the Mobile Broadband connection the primary method of
connecting to the Internet and disable other connection types. To enable Mobile broadband as a secondary failover,
please configure Mobile Broadband in the Advanced View.
ADSL
The following configuration options are available on the ADSL tab:
Username
Password
Protocol
VPI Number
VCI Number
To configure your ADSL connection, enter the username and password as supplied by your ADSL service Provider.
Select the applicable protocol for your ADSL service. You can select from:
PPP over Ethernet (or PPPoE)
PPP over ATM (or PPPoA)