User manual

AT-323 SIP Phone User Manual (V1.43)
48
3."dial number"
Convert the number dialed to a new number according to "enable"dial plan,
then prefix "dial number"to this new number. This new number is the number
sent.
4."prefix"
Effective only when "dial number"is not empty. This serves for those calling
cards.
The number sent is just "dial number". During the call connection, program will
automatically send out a number made up with ["account"+ "pin"+ number
converted by "enable"dial plan + ‘#’].
5."hotline"
The number sent is "dial number". Whenever the handset is lifted up, this
number will be automatically dialed out.
Q15 What is "inner line"?
A:Parameters "inner line"and "inner line prefix"help to distinguish whether the
number dialed is an inner line number. "inner line"contains 3 options:
1."disable"
No distinction among numbers. The number sent is the number converted
according to parameter "use dial plan".
2."enable"
If the number dialed is prefixed by "inner line prefix", the number sent is just
the number dialed because this number is an inner line number. Otherwise,
the number sent is the number converted according to parameter "use dial
plan".
3."omit prefix"
The only difference between 2 "enable"is that if the number dialed is prefixed
by "inner line prefix", the number sent is the number dialed dropping off this
prefix.
Q16 Why does it take so long before the phone logins to the server?
How to speed it up?
A:Before registration, phone will first visit FTP server and check if the server
has got new firmware or settings to upgrade, then it will visit the time server on
the Internet to get current date and time. If the FTP server’s address is a
domain name, program will visit DNS to resolve this domain name into IP
address. Besides, if local IP address is allocated by DHCP, we will check if the
allocated IP address conflicts with other devices. All these work will cost some
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]