User manual

AT-323 SIP Phone User Manual (V1.43)
36
set upgradetype X
Set auto-upgrade matching type，X is range from 0 through 5，
0------disable；1------all ；2------ mac；3------ppp id; 4------ account;
5------ phone number。
set upgradeaddr XXX.XXX.XXX.XXX
Set IP address or domain name of FTP server supplying upgraded
program of AT-320 IP phone.
set sntpIP XXX.XXX.XXX.XXX
Set IP address of time server.
set daylight X
Set use daylight or not. X ranged from 0 through 1: 0: do not use
daylight; 1: use daylight.
set timezone XX
Set time zone.
¾ Command store
Syntax descrIPtion: no keyword. Parameter ranged from 0 through 4.
Usage: Save the current settings to the designated position.
Relevant Usage: store 1
¾ Command load
Syntax descrIPtion: no keyword. Parameter ranged from 0 through 4.
Usage: Load the designated settings to the current position.
Relevant Usage: load 1
¾ Command exit
Syntax descrIPtion: no keyword and parameter
Usage: Exit from Telnet command window without saving the
configuration.
Relevant usage: None
¾ Command write
Syntax descrIPtion: No keyword and parameter
Usage: Save the configuration and restart the AT-320 IP phone.
¾ Command ping
Syntax descrIPtion: ping IP address
Usage: ping IP address of other NAT device
Relevant usage: In telnet window, input ping xx.xxx.xx.xx（an IP
address） and return, then the result will be displayed. If the address is
effective, “ping OK” will be seen; if the address is ineffective, nothing
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]